How To Remove Bathroom Light Cover

I have a bathroom light fixture that looks very similar to this.

How to remove bathroom light cover. Be careful with the last one to support the glass. Place one hand on the bottom of the globe and support it at all times. I don t currently have this type of light cover in my home but i found a helpful video from steve dethample on youtube that helpfully illustrates the process. You will be able to figure out how to remove it.

So these things bathroom exhaust fans get pretty dusty up there. Locate one or more flat headed screws on the metal collar the round part into which the globe is inserted. It is super simple to take the cover off so you can clean it. The cover must be removed to change the bulb or to clean the inside of the fixture.

Now if you have a light cover without screws e g. Many flush mount ceiling fixtures consist of a cover over the light to mute the brightness of the light and to provide a finished look. The bulb is in need of replacement and i am about ready to attack the thing with a hammer and smashing it off the ceiling. Back them out and the cover will fall out.

Do so replace the bulb bulbs test the light. How to remove light covers without screws. There is likely 3 screws evenly spaced around the metal base that are holding the glass cover in. Most covers are a thin plastic that is cut slightly larger than the opening.

Turn at least one of the screws on the collar counter clockwise to loosen it. Without a knob then you ll need to handle things a bit differently. Also i recommend using something that can blow out a lot of high. Flush mount ceiling fixtures do not protrude below the surface of the ceiling thereby providing an uncluttered look.