How To Change Bathroom Light Pull Switch

If this has not worked the whole unit must be replaced.

How to change bathroom light pull switch. Then unscrew the base unit which is mounted to the ceiling and remove the old unit. Pull cord switch undo the two retaining screws carefully pull down the switch a little. A 6 amp light pull switch is used to control lighting and a 45a shower. Light pulls also known as a pull cord switch are operated using a string to activate the switch.

In older homes they might be the same colour or in newer homes you will find black or brown or even blue. You can use a 20 amp circular junction box if it can be made accessible ie in the loft. With 6 amp pull cord switch for lights there are 2 3 wires. So if the pull switch just has one twin earth cable you need this to go to the landing switch.

They are commonly used as bathroom light switches and used in environments susceptible to water to keep the user as far away from the circuit as possible hence the string pull. There should be sufficient wiring to allow you to do this and as with the lighter duty switch spray with the maintenance spray and attempt to make the switch work properly. If you have a pull cord light switch in your home then it s not a case of if it fails but when it fails. Use a small flathead screwdriver to undo tightening screws and pull the wires out.